Mopar 2019-2024 Dodge Ram 2500-5500 6.7L Cummins Fuel And Oil Kit OEM

This Mopar filter kit includes the fuel and oil filters needed for routine service on 2019–2024 Ram 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins Turbo Diesel engine.

Instead of purchasing each filter separately, this kit puts all three together in one package: two fuel filters and one engine oil filter. The fuel filters help keep dirt, water, and other contaminants out of the fuel system, while the oil filter helps remove contaminants from the engine oil.

Product Specifications

• Brand: Mopar

• Part Numbers: 68157291AA, 68436631AA, 05083285AA

• Reference Numbers: MO-291, MO-631, MO-285AA

• SKU: B4L1015AWW

• Weight: 1.02 lb

• Dimensions: 10.08 × 4.84 × 4.49 in

• Product Grade: Performance Part

• Engine Application: 6.7L Cummins Turbo Diesel

Vehicle Fitment

What’s Included

• 1 × Mopar 68157291AA Fuel Filter

• 1 × Mopar 68436631AA Fuel Filter

• 1 × Mopar 05083285AA Oil Filter

Fuel Filters

The kit includes both fuel filters used in the 6.7L Cummins fuel system. These filters are responsible for catching contaminants before they can travel farther through the fuel system.

Replacing the fuel filters at the proper service interval helps maintain clean fuel delivery and protects fuel-system components from contamination.

Oil Filter

Also included is the Mopar 05083285AA oil filter. During normal engine operation, engine oil can pick up dirt and other small contaminants. The oil filter captures these particles as the oil circulates through the engine.

For best results, replace the oil filter whenever the engine oil is changed according to the maintenance schedule for your truck.

Basic Oil Filter Replacement

Before working on the truck, park it on a level surface, set the parking brake, and make sure the vehicle is safely supported if it needs to be raised.

Place a drain pan under the oil drain plug and drain the used engine oil. Once the oil has drained, remove the old oil filter.

Before installing the new Mopar 05083285AA, apply a small amount of clean engine oil to the filter gasket. Install the new filter following the tightening instructions specified for your vehicle.

Reinstall the drain plug and refill the engine with the correct oil type and quantity listed in your owner's manual. Start the engine, check around the filter and drain plug for leaks, then verify the oil level again.

Basic Fuel Filter Replacement

Park the truck safely and follow the fuel-filter service procedure specified for your model.

Remove the existing primary and secondary fuel filters carefully. Keep a suitable container or rags nearby to catch any diesel fuel that may remain in the filter housings.

Install the Mopar 68157291AA and 68436631AA fuel filters in their correct locations. Make sure the filters, seals, and housings are properly seated before completing the installation.

After replacement, prime the fuel system according to your RAM owner's or service manual. Check the filter housings and surrounding connections for any signs of leakage before driving the truck.

Keeping Your 6.7L Cummins Maintained

Fuel and oil filters are regular maintenance items on the 6.7L Cummins. Replacement intervals can vary depending on mileage, operating conditions, towing, idle time, and how the truck is used.

Always follow the maintenance schedule provided for your specific vehicle.

Used engine oil and filters should be taken to an appropriate recycling facility or participating automotive service location rather than placed with normal household waste.

Please Check Fitment Before Ordering

This kit is intended for the 2019–2024 Ram 2500, 3500, 4500, and 5500 with the 6.7L Cummins Turbo Diesel engine.

Please compare the listed part numbers with the filters required for your truck before ordering:

68157291AA • 68436631AA • 05083285AA

Vehicle configurations can vary. If you are unsure about fitment or installation, check your VIN, consult your RAM service information, or have the parts verified by a qualified technician.